25
Various settings
3If you wish to cancel the set rating level temporarily,
select “yes” with or , then press ENTER. If the
password has been selected, the password input
screen will appear.
Alternatively, if the password has not been set, play-
back will commence. If you don’t know (or have for-
gotten) the password, select “stop”.
Then press OPEN/CLOSE to remove the disc.
4Use the numeric keys to input the password.
•To interrupt the input process, press RETURN.
5Playback will commence if the entered password
was correct.
NOTE:
This temporary cancellation of the rating level will re-
main active until the disc is ejected.
When the disc is ejected, the original rating level will be
set again automatically.
This DVD/VCR is equipped with a channel memory fea-
ture that allows you to skip channels up or down to the
next channel set in memory, hence skip over unwanted
channels.
Before selecting channels, they must be programmed
into the DVD/VCR’s memory. In addition to normal VHF
and UHF channels, this DVD/VCR can receive up to
113 Cable TV channels. To use this DVD/VCR with an
antenna, set the TV/CABLE menu option to the TV mode.
When shipped from the factory, this menu option is in
the CABLE mode.

TV/Cable Select

Select “TV/Cable Select” and select “TV” or “Cable”.
TV: VHF/UHF channels
Cable:CABLE TV channels

Auto CH Memory

The VCR can receive a maximum of 181 channels by
presetting the channels into memory.
When you select “Auto CH Memory” and press ENTER
twice, the Auto CH Memory function will be activated.
The channel display will count up and when finished,
the screen returns to normal.

CH Add/Delete (channels)

You can add the channels you want or delete the chan-
nels you do not want manually.
Select “CH Add/Delete” and press ENTER.
1Press or to select the channel then press
ENTER.
2Press ENTER to select “Add” or “Delete”.

General Settings

Clock

The clock is set to the correct time automatically, but it
can also be set manually. The clock can be set for day-
light saving time and time zone.
Parental
Password
TV/Cable Select
Auto CH Memory
CH Add/Delete
Clock
GENERAL
SETUP
Select
End
Enter Back
ENTER RETURN
Auto
Manual
Standard Time
Daylight
Saving Time Auto
Auto

Auto

You can automatically set the clock by selecting “Auto”.
When you want to set the auto clock function to off,
se-
lect “Manual”. (See page 26.)
Standard Time (Time zone)
In the rare event that you live within the broadcast range
of two stations in two different time zone, the DVD/VCR
may recognize the wrong station for the auto clock set.
Time zones and correction times
Atlantic:GMT – 4 hours
(GMT: Greenwich Mean Time)
Eastern:GMT – 5 hours
Central:GMT – 6 hours
Mountain:GMT – 7 hours
Pacific:GMT – 8 hours
Alaska:GMT – 9 hours
Hawaii:GMT – 10 hours
Auto:AUTO SET
NOTES
•When shipped from the factory, the “Standard Time”
is set to “Auto”.
•After making the auto clock setting, in some cases
the clock may display another time zone. You can cor-
rect the clock by selecting your time zone setting
above.
•When the clock is not set or you set the clock manu-
ally, the time zone setting is not available.
2H5-01 P22-30 7/25/05, 23:1925