ZERO RETURN function / Video index search system

ZERO RETURN function

This function makes tape rewind- ing stop at the counter “00:00:00” position automatically.

1

2

Press DISPLAY.

The counter display shows the tape run- ning time during playback or recording.

Press COUNTER RESET at the desired tape position. The counter display will be reset to the “00:00:00” position (e.g. the be- ginning of recording).

8 : 47AM MON HI-FI

00 : 04 : 38 SP

8 : 47AM MON HI-FI

00 : 00 : 00 SP

3 Press STOP when playback or recording is finished.

Press ZERO RETURN.

 

The tape will be rewound or fast forwarded and automatically stop

 

at the “00:00:00” position.

Tape

 

 

 

 

 

Switching the display between clock and counter

playback

 

Press CLOCK/COUNTER. The clock

 

 

 

 

 

 

 

 

 

and tape counter alternate with each

 

 

 

 

 

other in the display.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTES for Counter Display:

• If you rewind the tape beyond

“00:00:00”, a minus sign (“–”) will

be displayed in front of the time.

• When you load a tape, the counter

will reset to “00:00:00”.

• The counter does not function on

non-recorded (blank) sections of

the tape.When you rewind, fast for-

Video index search system

This function enables you to locate the beginning of any record- ing made on the VCR.

Recording an INDEX MARK

The index search function automatically records

an INDEX mark on the tape whenever a record-CH 001 ing is initiated.

INDEX

ward or play tapes through blank

sections, the counter stops.

NOTES forVideo index search sys- tem:

When you record an INDEX mark at the very beginning of the tape, the mark may not be found.

During INDEX search, the tape may stop and begin to play at a slightly different location.

INDEX may not function properly with old or worn out video tapes.

INDEX marks may not be found if it is extremely close to the point where the search began.

In recording, if you stop recording temporarily, the INDEX mark is not recorded on the tape.

Index search

Press INDEX or during stop or play mode.

For Succeeding programs: Press INDEX.

For Preceding programs: Press INDEX . (Additional press increases the INDEX NO. up to 9.)

When the INDEX or is pressed, the unit starts searching the selected INDEX NO. and finds the portion. Then playback starts automatically.

To stop the INDEX SEARCH, press STOP.

+3

oris displayed

INDEX NO. (up to 9)

49

2H5-01 P45-52

49

7/25/05, 23:22

Page 49
Image 49
Toshiba D-VR4XSU owner manual Zero Return function / Video index search system