Dubbing
80
Preparation:
•Turn ON the TV and set to the video input mode.
Load a source disc and a video tape for recording.
Confirm the remaining tape for recording before operation.
1Press VCR to set this unit to VCR mode.
The VCR indicator will light.
2Press REC MODE/SPEED and select the recording mode.
When REC MODE/SPEED is pressed each time, “SP” or “SLP”
is selected.
The recording mode is indicated on both the TV screen and the
display window.
•For the details of the recording mode, see page 46.
3Press DVD and set the unit to DVD mode.
NOTE:
Confirm that the DVD indicator lights.
4Press DUBBING.
The DVD is waiting for playback and the VCR is waiting for re-
cording. Then the following message appears.
5Press DUBBING, or press or to select “Yes” and press EN-
TER.
Dubbing starts.
•To cancel dubbing, press STOP, or select “No” and press EN-
TER.
Confirm dubbing from DVD to VCR.
Yes No
In dubbing, during DVD playback, VCR recording and “dub” (dub-
bing) indicator appear on the display window.
Video recording DVD playback
6Press STOP to stop dubbing.
NOTES:
Dubbing cannot be accomplished
when
- a copy protected disc is used.
-the erase prevention tab of video
tape is removed.
Dubbing stops when
-the disc is played back to the end
and stops.
-recording space becomes full.
During dubbing, the unit is
changed to interlaced scan mode
automatically if it has been previ-
ously set to progressive scan
mode.
If no special permission is obtained
from the copyright owner, videos
recorded from TV programs or
movies can only be used for your
own personal enjoyment.
You can record both video and
audio from a disc to a video tape.
When a disc with a copy guard is
used, a distorted image is re-
corded onto the video tape.

Dubbing a disc onto a tape

Dubbing only the specified titles or the playlist

When you want to dub only specific titles or playlists recorded on the disc, start the playback of the desired title or
playlist, and then immediately press DUBBING, STOP or PAUSE/STILL. If you press DUBBING, proceed from
step 5 above. If you press STOP or PAUSE/STILL, proceed from step 4 above. The first few seconds of the title or
playlist may not be recorded. When playback of the desired title or playlist is completed, press STOP to stop
dubbing. If you don’t press STOP, dubbing will continue.
2H5-01 P74-81 7/25/05, 23:2380