Toshiba D-VR4XSU Dubbing a tape onto a disc, Press DUBBING, or press To select Yes and press

Dubbing

Dubbing a tape onto a disc

You can record video or audio on a video tape onto a disc.

Preparation:

•Turn ON the TV and set to the video input mode.

•Load a source video tape and a disc for recording.

•Remove the erase protection tab of the source video tape to prevent the data from accidentally being erased.

•Confirm the disc space before operation.

1 Press DVD to set this unit to DVD mode. The DVD indicator will light.

2 Press REC MODE/SPEED and select the recording mode.

•When REC MODE/SPEED is pressed each time, “SP”, “LP”, “SLP” or “XP” is selected in this order.

•The recording mode is indicated on both the TV screen and the display window.

•For the details of the recording mode, see page 50.

3 Press VCR and set the unit to VCR mode.

NOTE:

Confirm that the VCR indicator lights.

4 Press DUBBING.

• The unit is changed to DVD mode automatically.

• The VCR is waiting for playback and the DVD is waiting for re-

	cording. Then the following message will appear.			Dubbing
5	Press DUBBING, or press	or	to select “Yes” and press

ENTER.

Dubbing starts.

•To cancel dubbing, press STOP, or select “No” and press EN- TER.

Confirm dubbing from VCR to DVD.

YesNo

NOTES:

•Dubbing cannot be accomplished when

-a copy protected tape is used.

-disc protection is set.

-disc has no recording space.

•Dubbing stops when

-the video tape is played back to the end and stops.

-recording space becomes full.

•The videos recorded from TV pro- grams or movies can be used only for your personal enjoyment with- out permission of the copyright holder.

In dubbing, during VCR playback, DVD recording and “dub” (dub- bing) indicator appear on the display window.

Video playback DVD recording

6 Press STOP to stop dubbing.

79

2H5-01 P74-81 79 7/25/05, 23:23