Setting System Parameters
Station Relocation
Automatic Relocation
This function enables you to physically move a telephone from one location to another while maintaining all of the telephone’s programmed features. Use the “Telephone Location Record” on Page 45 for telephone location tracking.
➤To turn on the Auto Station Relocation feature
1.From the Administrator station, press a [DN] +
to turn on the Auto Station Relocation feature.
2.Press 6SNU.
You hear a confirmation tone indicating the Station Relocation feature is on. If you hear a busy tone, the Station Relocation feature is already turned on, or you did not dial from the Administrator station.
➤To physically relocate (swap) Station A and B
Important! Make sure that the location that the phone is moving to is already vacant.
If you are moving a telephone (for example, Station A) to a new location that already has a telephone connected to it (for example, Station B), disconnect Station B from its telephone jack before you disconnect Station A.
You cannot configure the moving station (Station A) to an already occupied station (Station B).
1.Verify that the telephone jack for the new location does not have a telephone connected.
2.Unplug the telephone that is moving from its wall jack at the old location.
Strata DK System Administrator Guide 5/00 | 15 |
