Setting System Parameters
Emergency 911 Calls
If the system does not use LCR or if the station does not have a CO Line, Pooled Line or CAMA CO buttons – when a is dialed as an access code, the station seizes a “dial 9” CO line on its [PDN]. When
is entered, the 911 call will be sent one of two ways:
♦If the station does not have another idle [PDN] or CAMA CO button, the 911 call will be sent out the normal CO line in the dial 9 line group without the station’s CESID.
♦If the telephone has another [PDN] or CAMA CO button, and it is idle, the first PDN will drop and the second [PDN] or CAMA CO button will be connected to the CAMA trunk. 911 plus the station’s CESID will be sent out the CAMA trunk.
Emergency Calling from the Attendant Console
The PC attendant console and the DK attendant console can be programmed make E911 calls two different ways, by using either CO line buttons or the INT button to initiate the call. The procedure and results are described below:
From the attendant console, the Attendant can press:
♦a CO /LQH, 3RROHG/LQH or CAMA CO button and dial 911. When 911 is dialed from an outgoing line button, the outgoing line button drops and the CAMA trunk is seized on the INT button. 911 plus the Attendant Console CESID is sent out the CAMA trunk.
♦...or the ,17 or [PDN] button and dial 911. When 911 is dialed, the ,17 or [PDN] releases from the internal connection and seizes the CAMA trunk. 911 plus the Attendant Console CESID is sent out the CAMA trunk.
8 | Strata DK System Administrator Guide 5/00 |