Advanced Operation
Tone/Pulse Dialing
50 Strata CTX DKT3000/2000-Series Telephone 05/02
The numbers are defined in Table 4:
Tone/Pulse Dialing
With some older Central Offices, you may have to make calls on outside lines
programmed for rotary dial pulses. This feature enables you, while on these lines, to
switch to tone dial to access remote equipment (such as an answering machine)
requiring touchtones.
Note With ISDN calls, when 7RQH'LDO6HO HFW is pressed, all of the digits en tered
after that point will be sent with touchtones.
➤To ch an ge To ne Di ali ng
1. Access an outside line.
2. Dial a telephone number.
3. While on the call, press 7RQH'LDO6HOHFW. Although the outside line is
programmed for rotary dial pulses, access the outside line and dial the telephone
number like any other call described in this user guide.
The Tone LED lights steady red and you are able to send toucht one s with yo ur dia l
pad. The feature is cancelled when the call is completed.
Table 4 Dial String Characters
Entry Meaning
0~9
End of Speed Dial Number when entering via access code (
Escape. “” functions as an escape key indicating that the number immediately fol low i ng
represents something exceptional. When is used as an escape character, it consumes
one Speed Dial digit. Entering to insert a seven-second pause would use two of 32
characters.
Pause (1~9) seconds. If you need to pause longer than nine seconds, enter additional
pause escape sequences. For example, to insert a 17-second pause, enter . The
display of a pause in the Speed Dial Number shows a “P” wit ho u t sp eci fy in g th e du ra ti on . I n
this example, you would see “PP.”

 