Toshiba DKVR60KU owner manual Audio Out

GENERAL SETTING

Playback (cont’d)

2 Audio Out

Choose the appropriate audio setting for your external device.

It will only affect a disc playback.

Use [K / L] to select a desired item, then press [ENTER].

Audio Out

A Dynamic Range Control

B PCM

C Dolby Digital

D DTS

A Dynamic Range Control (Default : ON)

Set to “ON” to compress the range between soft and loud sounds.

Use [K / L] to select a setting, then press [ENTER].

Dynamic Range Control

ON

OFF

Your setting will be activated.

Note

•Dynamic range control function is available only on the discs which are recorded in the Dolby Digital format.

B Settings for PCM (Default : 48kHz)

Use [K / L] to select a setting, then press [ENTER].

PCM

48kHz

96kHz

Your setting will be activated.

48kHz	: If your amplifier/decoder is NOT compatible
	with 96kHz PCM, select “48kHz”. 96kHz sound
	will be output in 48kHz.
96kHz	: If your amplifier/decoder is compatible with
	96kHz PCM, select “96kHz”. 96kHz sound will
	be output.

Note

When playing back disc with copyright protection

•Even if you select “96kHz”, the sound will be down sampled at 48kHz.

C Settings for Dolby Digital (Default : Stream)

Use [K / L] to select a setting, then press [ENTER].

Dolby Digital

PCM

Stream

Your setting will be activated.

PCM	: Converts the Dolby Digital into PCM (2 channel).
	When your amplifier/decoder is NOT
	compatible with Dolby Digital, set to “PCM”.
Stream	: Outputs Dolby Digital signals.
	When your amplifier/decoder is compatible
	with Dolby Digital, set to “Stream”.

D Settings for DTS (Default : ON)

Select a setting using [K / L], then press [ENTER].

DTS

ON

OFF

Your setting is activated.

ON	: Outputs DTS signals.
	If your amplifier / decoder is compatible with
	DTS, set to “ON”.
OFF	: No DTS signal is output.
	If your amplifier / decoder is NOT compatible
	with DTS, set to “OFF”.

90 EN

E9PKBUD_DKVR60KU_EN.indd 90

8/11/2009 4:01:39 PM