Toshiba DKVR60KU owner manual Use K / L to enter the date, then, Press B, DVD or VCR, then press B

				TIMER RECORDING
3	Use [K / L] to enter the date, then				Refer to “Recording Mode” on page 34 for DVD
	press [B].				or “Recording” on page 100 for VCR.
					• You can check the remaining recordable space
	JAN/02	- - : - -		- - : - -	of the disc when you select the recording
	Date	Start		End
	L1/L2	REC To	Mode		mode.
	L1	DVD		SP
			SP	2 : 00	Date	Start		End
					JAN/02	1 : 00AM	2 : 00AM
	JAN/01				L1/L2	REC To	Mode
					L1	DVD		SP
				When pressing [L] at			SP	1 : 00
	Daily

MON-SAT

MON-FRI

SAT

FRI

SUN

JAN/31

the current date, the

date will change as

follows.

e.g.) January 1st

Auto recording mode select (DVD only)...

When “Auto” is selected as a recording mode, the unit calculates how much time is available on the disc and determines the appropriate recording mode to complete recording the program.

Date	Start	End
JAN/02	1 : 00AM	2 : 00AM
L1/L2	REC To	Mode
L1	DVD	Auto
		Auto 1 : 00

4Use [K / L / { / B] or [the Number buttons] to enter the start and end time, then press [B].

Date		Start		End
JAN/02	1	: 00AM		- - : - -
L1/L2	REC To		Mode
L1		DVD		SP
			SP	2 : 00

•You cannot make a program whose recording time exceeds 12 hours.

5Use [K / L] to select an appropriate external input (L1/L2) to which your external tuner is connected, then press [B].

•“Auto” is only available for one program in the timer program list.

•The recording may be cut short, when the available recording space of the disc is too limited.

8 Press [ENTER] when all items are entered.

After displaying an instructive message for 10 seconds, timer program list will appear.

Press TIMER SET for Timer Standby mode. Ensure the external source is turned to the correct channel.

When Timer set on DVD or VCR,

it is not available in the standby mode.

Press TIMER SET to cancel the Standby mode.

Date

Start

End

Timer Programming

JAN/02

1 : 00AM

2 : 00AM

L1/L2

REC To

Mode

JAN/ 2/09 1:00 AM L1 SP

SP (1:00)

THU JAN/01 10:00AM

L1

DVD

SP

SP

1 : 00

Date

Start

End

L1/L2

JAN/02

1:00AM

2:00AM

L1

6

Use [K / L] to select a recording media

Your program setting is stored.

(“DVD” or “VCR”), then press [B].

• To set another program, repeat steps 2 to 7.

• To exit, press [TIMER PROG.] or [SETUP].

• When 2 or more programs are overlapped,

JAN/02

1 : 00AM

2 : 00AM

Date

Start

End

“Timer program overlapped” appears, and the

L1/L2

REC To

Mode

L1

DVD

SP

overlapped program will be displayed in blue.

SP

1 : 00

To correct the timer program refer to

“Checking, canceling, or correcting the timer

7

Use [K / L] to select a recording

programming information” on page 41.

mode.

9

Press [TIMER SET] to set a timer

Date

Start

End

programming.

JAN/02

1 : 00AM

2 : 00AM

L1/L2

REC To

Mode

will appear on the front panel display, while this

L1

DVD

SP

SP

1 : 00

unit waits to make the recording.

CS

DR

CD

HDD

DVD

“VCR” will appear on the front panel display if VCR

timer recording have been set.

40 EN

E9PKBUD_DKVR60KU_EN.indd 40

8/11/2009 4:00:35 PM