Toshiba DKVR60KU Functional Overview, Front Panel, Rear Panel, Introduction Connections

FUNCTIONAL OVERVIEW

Front Panel

1	2	3*	4	5	6	7
		VCR	DVD
		TRACKING DUBBING	SELECT				(*) The unit can also be
					L2	L3	turned on by pressing
				VIDEO	L R	DV IN	these buttons or by
22	21 20 19 18 1716 15	14 13 12 11 10 9* 8					inserting a cassette tape.

Introduction Connections

1.I/y ON/STANDBY button (DVD/VCR)

•Press to turn on the unit, or to turn the unit into the standby mode. (To completely shut down the unit, you must unplug the AC power cord.)

2.Cassette compartment (VCR)

•Insert a cassette tape here.

3.A OPEN/CLOSE button (DVD)*

•Press to open or close the disc tray.

4.Disc tray (DVD)

•Place a disc when it is open.

5.VIDEO input jack (L2) (DVD/VCR)

•Use to connect external device with an RCA video cable.

6.AUDIO input jacks (L2) (DVD/VCR)

•Use to connect external device with an RCA audio cable.

7.DV IN jack (L3) (DVD/VCR)

•Use to connect the DV output of external device with a DV cable.

8.I REC button (DVD)

•Press once to start a recording.

•Press repeatedly to start the one-touch timer recording.

9.PLAY B button (DVD)*

•Press to start or resume playback.

10.STOP C button (DVD)

•Press to stop playback or recording.

•Press to stop the proceeding timer recording in DVD.

11.VCR/DVD indicator

•Lights up when the VCR/DVD output mode is selected.

12.VCR/DVD button (DVD/VCR)

•Press to select the component you wish to operate.

13.DUBBING button (DVD/VCR)

•Press to start VCR to DVD (DVD to VCR) duplication which you set in the main menu.

14.TRACKING / buttons (VCR)

•Press to adjust the tracking during playback or in slow motion of the cassette tape.

•While playback is in still mode, you can stabilize the picture.

15.Display

•Refer to “FRONT PANEL DISPLAY GUIDE” on page 18.

16.Infrared sensor window (DVD/VCR)

•Receive signals from your remote control so that you can control the unit from a distance.

17.I REC button (VCR)

•Press once to start a recording. Press repeatedly to start the one-touch timer recording.

18.PLAY B button (VCR)

•Press to start playback.

19.EJECT/STOP A/C button (VCR)

•When the unit is in stop mode, press to remove the cassette tape from the cassette compartment.

•Press to stop cassette tape playback or recording.

•Press to stop the proceeding timer recording in VCR.

20.FWD D button (VCR)

•Press to rapidly advance the cassette tape, or view the picture rapidly in forward during playback (forward search).

21.REV E button (VCR)

•Press to rewind the cassette tape, or to view the picture rapidly in reverse during playback (rewind search).

22.Power indicator

•This indicator lights up in green when the unit is active and turns off when the unit is in standby mode.

Disc Basic Setup Management Recording Playback

Rear Panel

12

HDMI OUT

			DVD/VCR
DIGITAL	AUDIO	S-VIDEO	COMPONENT	S-VIDEO	IN ---AUDIO---OUT
AUDIO OUT	OUT		VIDEO OUT		(L1)
			Y		L	L
	L	OUT	PB	IN	R	R
			/CB
COAXIAL					IN ---VIDEO---OUT
	R		PR
			/CR

10 3 9 8 7 6 5 4 3

Editing

1.AC Power Cord

•Connect to a standard AC outlet to supply power to this unit.

•Unplug this cord from the AC outlet to completely shut down the unit.

2.HDMI OUT jack

•Use an HDMI cable to connect to a display with an HDMI compatible port.

3.AUDIO OUT jacks

•Use to connect a TV monitor, AV receiver or other device with an RCA audio cable.

4.VIDEO OUT jack

•Use to connect a TV monitor, AV receiver or other device with an RCA video cable.

5.VIDEO IN jack (L1)

•Use to connect external device with an RCA video cable.

6.AUDIO IN jacks (L1)

•Use to connect external device with an RCA audio cable.

7.S-VIDEO IN jack (L1)

•Use to connect the S-video output of external device with an S-video cable.

8.COMPONENT VIDEO OUT jacks

•Use to connect a TV monitor with component video inputs with a component video cable.

9.S-VIDEO OUT jack

•Use to connect the S-video input of a TV monitor, AV receiver or other device with an S-video cable.

10.COAXIAL DIGITAL AUDIO OUT jack

•Use to connect an AV receiver, Dolby Digital decoder or other device with a coaxial digital input jack with a digital coaxial cable.

Note

•Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.

Caution on using S-video, component, or HDMI connection for VCR:

•Only the playback audio / video is available with these connections.

Function Setup VCR Function Others

EN 11

E9PKBUD_DKVR60KU_EN.indd 11

8/11/2009 3:59:49 PM