1
2
3
4
5
6
7
8
9
10
11
12
6-8 SELECTING FINISHING MODES (USING THE OPTIONAL FINISHERS)
5. HOLE PUNCHING MODE
1Set the originals. Page 2-4
2Press the key on the basic screen as shown on the
right (shaded).
With the optional punching unit attached to the optional finisher (MJ-1012 or MJ-1013 only), you can
have your copies punched with holes.
* The thickness of paper should be in the range of 64 to 200 g/m2. Special paper such as OHP film is
excluded.
3Press the HOLE PUNCH key.
• If the key for the desired function is not shown, press the
Next key to switch the screen.
Select other copy modes as required.
4Press the START key.
Tip
Number of punch holes and available paper sizes:
Since the number of punch holes and the distance between
the holes vary depending on countries, purchase a punching
unit that meets your requirements. (For details, consult your
service technician.)
Japan and most of
Europe (MJ-6001E)
North America
(MJ-6001N)
France
(MJ-6001F)
Sweden (MJ-6001S)
Number of punch holes and hole diameter
2 holes
(6.5 mm dia.)
2/3 holes switchable
(8.0 mm dia.)
4 holes
(6.5 mm dia.; 80 mm pitch)
4 holes
(6.5 mm dia; 70, 21 mm pitch)
Available paper sizes
A3, A4, A4-R, B4, B5, B5-R,
FOLIO
2 holes: LG, LT-R, COMP
3 holes: LD, LT
A3, A4
A3, A4, A4-R, B4, B5, B5-R,
FOLIO