1
2
3
4
5
6
7
8
9
10
11
12
7-8 WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH PANEL
Installing a New Toner Bag
11
Install the new toner bag by reversing the procedure
used for removing one.
Refer to the procedure in steps 2 and 3 on page 7-6.
When the REPLACE TONER BAG symbol flashes:
When the toner bag becomes full of used toner, the REPLACE
TONER BAG symbol flashes and this message ap-
pears:
Dispose of used
toner
Replace the toner bag by following the instructions on page
7-6.
Note
It is recommended that the used toner bag be replaced at the
same time as the toner cartridge.
3. REPLACE TONER CARTRIDGE SYMBOL (Cont.)
9Holding the cartridge so that the arrow on its lower
side is kept in the position shown on the right, in-
sert the cartridge completely.
10
Return the cartridge holder back to its original po-
sition.
Tip
The amount of toner consumed varies depending on the origi-
nals and the image quality mode.