Toshiba e-STUDIO45, e-STUDIO35 manual Adjust the width of the margin, then press the SET key

4 Adjust the width of the margin, then press the SET key.

•The default width of the margin is 7 mm.

•To adjust the width, press the 0mm or 30mm key and select the desired number, then press the SET key.

•In duplex copying, margins on the back are created on the other side of those in the front.

Duplex copying Page 3-10

Select other copy modes as required.

5 Press the START key.

4

Providing Book-binding Margin

When Book Margin is selected, use it in conjunction with the DUPLEX COPYING mode from book originals ( Page 3-13) or the Dual-Page Copying mode (double-sided) ( Page 4-5).

3

4

Press the BOOK key.

Adjust the width of the margin, then press the SET key.

•The default width of the margin is 14 mm.

•To adjust the width, press the 2mm or 30mm key to select the desired number, then press the SET key.

Select other copy modes as required.

5 Press the START key.

Tip

Image shift copying can also be performed in bypass copy- ing. To do this, after setting paper in the bypass tray ( Page 3-4), press the corresponding COPY SIZE key to specify the size of the paper.

4-3