1
2
3
4
5
6
7
8
9
10
11
12
4-4 USING THE EDITING FUNCTIONS
2. EDGE ERASE COPYING
If your original has a dirty or torn edge, it may be reproduced as a black stain on the copy. In that case,
use Edge Erase Copying. A white border is created along the edges of the copy, eliminating those black
stains. The default width of the white border is 5 mm, but it can be adjusted between 5 to 20 mm.
1Set the original(s). Page 2-4
2Press the EDIT key to enter the editing menu. Then,
press the EDGE ERASE key.
• If the key for the desired function is not shown, press the
Pre key to switch the screen.
3Adjust the width of the white border, then press
the SET key.
• The default width of the white border is 5 mm.
• To adjust the width, press the 5mm or 20mm key and
select the desired number, then press the SET key.
Select other copy modes as required.
4Press the START key.
Tip
Edge Erase copying can also be performed in bypass copy-
ing. To do this, after setting paper in the bypass tray (
Page 3-4), press the corresponding COPY SIZE key to
specify the size of the paper.