Toshiba F60 Data Verification, menu, mode, Click, in the, utility, Mark the, Click the, check box, to access the, When you back up a, 5.Click the OK button, Data CD/DVD

Operating Basics

■You might not be able to use the 'Disc Backup' function of TOSHIBA Disc Creator to back up a DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer) or DVD+RW disc that was made with other software on a different optical media recorder.

■If you add data to a DVD-R, DVD-R (Dual Layer), DVD+R or DVD+R (Double Layer) disc that you have already recorded to, you might not be able to read the added data under some circumstances. For example, it cannot be read under 16-bit operating systems, such as Windows 98SE and Windows Me, while in Windows NT4 you will need Service Pack 6 or later, and in Windows 2000, you will need Service Pack 2. In addition to this, some DVD-ROM and DVD-ROM / CD-R/RW drives cannot read this added data regardless of the operating system.

■TOSHIBA Disc Creator does not support recording to DVD-RAM discs - to achieve this you should use Windows Explorer or another similar utility.

■When you back up a DVD disc, be sure that the source drive supports recording to DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer) or DVD+RW media - if this is not the case then the source disc might not be backed up correctly.

■When you back up a DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer) or DVD+RW disc, be sure to use the same type of disc.

■You cannot partially delete any data written to a CD-RW, DVD-RW or DVD+RW disc.

Data Verification

To verify that data has been written or rewritten correctly to a data CD/DVD you should follow the steps below before you begin the write/rewrite process:

1.Click Start ->All Programs ->TOSHIBA ->CD&DVD Application ->Disc Creator to access the TOSHIBA Disc creator utility.

2.Open the Data CD/DVD Setting dialog box by one of the following methods:

■Click the Recording settings button ( ) for writing on the main toolbar in the Data CD/DVD mode.

■Select Settings for Each Mode ->Data CD/DVD in the Setting menu.3.Mark the Verify written data check box.4.Select File Open or Full Compare mode.5.Click the OK button.

User’s Manual 4-19