TOSHIBA PC Health Monitor

Cleaning the cooling module

This section explains how to clean the Cooling module.To clean the cooling module, follow the steps as detailed below:

1.Shut down the computer - make sure the Power indicator is off (refer to the Turning off the power section in Chapter 1, Getting Started if required).

2.Remove the AC adaptor and all cables and peripherals connected to the computer.

3.Remove the battery pack (refer to the Replacing the battery pack section in Chapter 6, Power and Power-Up Modes, if required).

4.Open the display panel.

5.Slip your finger under a notch at the end of the keyboard brace and lift up to release latches and remove the keyboard brace.

1

1. Keyboard barce

Figure G-1 Removing the keyboard brace

6. Remove three screws and the metal fittings securing the keyboard.

2

1

1. Screws

2. Metal fittings

Figure G-2 Removing the screws and metal fittings

User’s Manual

G-3