Toshiba F60 Sound system, Additional memory module, volume, No sound is heard, Turn off the computer, 6.Turn on the computer, 1.Turn off the computer

Troubleshooting

Additional memory module

Please also refer to Chapter 3, Hardware, Utilities and Options, for further information on installing and removing memory modules.

ProblemProcedure

If there is a memory malfunction, the Power indicator will repeatedly flash (on for 0.5 seconds, off for 0.5 seconds) in the following patterns;

If there is an error in only slot A: orange twice, then green or white once.If there is an error in only Slot B: orange once, then green or white twice.

If there are errors in both Slot A and Slot B: orange twice, then green or white twice.

In the event the Power indicator flashes when the computer is turned on, you should first check that the installed memory module(s) are compatible with the computer. If there is an error with a compatible memory module, there is a possibility the memory module is damaged.

If you determine that an incompatible module has been installed, you should follow the steps as detailed below:

1.Turn off the computer.

2.Disconnect the AC adaptor and all peripheral devices.3.Remove the battery pack.4.Remove the incompatible memory module.5.Install the battery and/or connect the AC adaptor.6.Turn on the computer.

If you are still unable to resolve the problem, contact your reseller, dealer or service provider.

An error will occur if a memory module is inserted into Slot B while no memory module is inserted in Slot A.

Remove the memory module from Slot B and insert it into Slot A.

Sound system

In addition to the information in this section, please also refer to the documentation supplied with your audio device.

Problem	Procedure
No sound is heard	Adjust the volume control dial.
	Turn the dial clockwise to increase the volume
	and turn it counter-clockwise to decrease the
	volume.
	Check the software volume settings.
	Please check to see if Mute is turned to Off.

User’s Manual 9-19