Toshiba G50 END, Problem, Problem, Problem, garbled, Password, password, Keyboard, provider, Procedure, Press the, Procedure, Procedure, System Date, System Time

Qosmio G50

Real Time Clock

Problem

The following message is Displayed on the screen:

RTC battery is low or CMOS checksum is inconsistent. Press [F1] key to set Date/Time.

Procedure

The charge in the Real Time Clock (RTC) battery has run out - you will need to set the date and time in the BIOS setup application by using the following steps:

1.Press the F1 key - the BIOS setup application will load.2.Set the date in the System Date field.3.Set the time in the System Time field.4.Press the END key - a confirmation message will be displayed.

5.Press the Y key - the BIOS setup application will end and the computer will restart.

Password

Problem	Procedure
Cannot enter	Please refer to the TOSHIBA Password Utility
password	section in Chapter 6, Power, for further
	information.

Keyboard

Keyboard problems can be caused by the setup and configuration of the computer - please refer to Chapter 5, The Keyboard, for further information.

Problem	Procedure
Output to screen is	Please refer to your software’s documentation to
garbled	ensure that its is not remapping the keyboard in
	any way (remapping involves changing or
	reassigning the function of each key).
	If you are still unable to use the keyboard, you
	should contact your reseller, dealer or service
	provider.

User’s Manual 10-7