Qosmio G50

Data Verification

To verify that data has been written or rewritten correctly to a data CD/DVD you should follow the steps below before you begin the write/rewrite process:

1.Display the setting dialog box by one of the following two steps:

■Click the Recording settings button ( ) for writing on the main toolbar in the Data Disc mode.

■Select Settings for Each Mode ->Data Disc in the Setting menu.

2.Mark the Verify written data check box.

3.Select File Open or Full Compare mode.

4.Click the OK button.

How to learn more about TOSHIBA Disc Creator

Please refer to the Help files for additional TOSHIBA Disc Creator information.

■Opening the TOSHIBA Disc Creator Manual

Start ->All Programs ->TOSHIBA ->CD&DVD Applications ->Disc

Creator Help

When Using Ulead DVD MovieFactory for TOSHIBAHow to make a DVD-Video

There are two ways to create DVD-Video.

Method 1: Simplified steps for making a DVD-Video from video data captured from a DV-Camcorder:

1.Click Start ->All Programs ->DVD MovieFactory for TOSHIBA ->Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD MovieFactory.

2.Insert a DVD-RW or DVD+RW disc in Burner.

3.Click Video Disc ->Burn Video to Disc to launch Direct Recording dialog box, choose DVD-Video/+VR to invoke Straight Capture to Disc Page.

4.Choose DVD-Videoformat.

5.Choose the capture source is DV.

6.Press Capture button.

Method 2: Simplified steps for making a DVD-Video from adding video source:

1.Click Start ->All Programs ->DVD MovieFactory for TOSHIBA ->Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD MovieFactory.

2.Click Video Disc -> New Project to invoke 2nd Launcher, choose your project type, then invoke DVD MovieFactory.

3.Add source from HD Disk by click Add Video files button to invoke browser dialog box.

User’s Manual

4-25