Toshiba G50 Start, Start, Hibernate, Save changes, Control Panel, Hard Disk Drive, When I close the lid, Starting Hibernation Mode, Automatic Hibernation Mode

Qosmio G50

Starting Hibernation Mode

You can also enable Hibernation Mode by pressing FN + F4 - please refer to Chapter 5, The Keyboard, for further details.

To enter Hibernation Mode, follow the steps below.

1.Click Start.

2.Click the arrow button ( ) in the power management buttons

( ) and select Hibernate from the menu.

Automatic Hibernation Mode

The computer can be configured to enter Hibernation Mode automatically when you press the power button or close the lid. In order to define these settings, you can follow the steps as described below:

1.Click Start and click the Control Panel.

2.Click System and Maintenance and click Power Options.3.Click Choose what the power buttons do or Choose what closing the lid does.

4.Enable the desired Hibernation Mode settings for When I press the power button and When I close the lid.

5.Click the Save changes button.

Data save in Hibernation Mode

When you turn off the power in Hibernation Mode, the computer will take a moment to save the current data in memory to the hard disk drive. During this time, the Hard Disk Drive indicator will glow.

After you turn off the computer, and the content of memory has been saved to the hard disk drive, turn off the power to any peripheral devices.

Do not turn the computer or devices back on immediately. Wait a moment to let all capacitors fully discharge.

User’s Manual 3-9