Toshiba G50 Turn off the computer, 6.Turn on the computer, 1.Turn off the computer, Additional memory module, 3.Remove the battery pack, B:orange twice, then white twice

Qosmio G50

Additional memory module

Please also refer to Chapter 9, Optional Devices, for further information on installing and removing memory modules.

ProblemProcedure

If there is a memory malfunction, the Power indicator will repeatedly flash (on for 0.5 seconds, off for

0.5seconds) in the following patterns;

If there is an error in only slot A or no memory module is inserted in Slot A: orange twice, then white once.

If there is an error in Slot B: orange once, then white twice.If there are errors in both Slot A and SlotB:orange twice, then white twice.

In the event the Power indicator flashes when the computer is turned on, you should first check that the installed memory module(s) are compatible with the computer. If there is an error with a compatible memory module, there is a possibility the memory module is damaged.

If you determine that an incompatible module has been installed, you should follow the steps as detailed below:

1.Turn off the computer.

2.Disconnect the AC adaptor and all peripheral devices.3.Remove the battery pack.4.Remove the incompatible memory module.5.Install the battery and/or connect the AC adaptor.6.Turn on the computer.

If you are still unable to resolve the problem, contact your reseller, dealer or service provider.

An error will occur if a memory module is inserted into Slot B while no memory module is inserted in Slot A.

Remove the memory module from Slot B and insert it into Slot A.

User’s Manual 10-19