Toshiba G50 mode *1, Options, supply *1, automatic, Sleep Mode, Low battery, Battery save, Power Options, Hibernation Mode, Intelligent power, Heat dispersal *1

	Qosmio G50
Intelligent power	A microprocessor in the computer’s intelligent
supply *1	power supply detects the battery’s charge,
	automatically calculates the remaining battery
	capacity and protects electronic components
	from abnormal conditions such as a voltage
	overload from the AC adaptor. This can be
	specified in the Power Options.
Battery save	This feature lets you configure the computer in
mode *1	order to save battery power. This can be
	specified in the Power Options.
Panel power on/off *1	This feature automatically turns power to the
	computer off when the display panel is closed,
	and turns it back on when the display panel is
	opened. This can be specified in the Power
	Options.
Low battery	When battery power is exhausted to the point that
automatic	computer operation cannot be continued, the
Hibernation Mode *1	system automatically enters Hibernation Mode
	and shuts itself down. This can be specified in the
	Power Options.
Heat dispersal *1	To protect against overheating, the processor has
	an internal temperature sensor so that, if the
	computer’s internal temperature rises to a certain
	level, the cooling fan is turned on or the
	processing speed is lowered. This can be
	specified in the Power Options.

If the processor’s temperature reaches an unacceptably high level with either setting, the computer will automatically shut down to prevent any damage - in this instance all unsaved data in memory will be lost.

Hibernation Mode	This feature lets you turn off the power to the
	computer without exiting from your software. The
	contents of main memory are automatically
	saved to the hard disk drive so that when you
	next turn the power on again, you can continue
	working right where you left off. Refer to the
	Turning off the power section in Chapter 3,
	Getting Started, for more details.
Sleep Mode	If you have to interrupt your work, you can use
	this feature to allow you to turn off power to the
	computer without exiting from your software. Data
	is maintained in the computer’s main memory so
	that when you next turn on the power, you can
	continue working right where you left off.

User’s Manual 1-13