Wall | Toshiba IK-DF02A specification

Wall

1.81 (46)

1.81 (46)

depth about 1.58 (40)

3.94 (100)

Screw ( 0.18 (4)) x4 - TP4 x37

3.29 (83.5)

Dimensions: inch (mm)

- 21 -

Image 22

Toshiba IK-DF02A instruction manual Wall

Contents

Table of Contents Dome Camera Important Safeguards Page Disclaimer Features and Description Components Part Names and Functions Pan ADJ Screw Basic connection single system configuration Connections OFF Line lock Control Installing the Camera InstallationCover Removal with the Tamper Resistant Feature Enabled Mounting Holes To Determine Which Set of Mounting Holes to Use Installation to a Wall or Ceiling Ii Notching Out a Hole for the Wires Mounting Screw x Not supplied Ii Mounting the Camera to a Switch Box Positioned Sideways Ceiling Adjusting the Viewing Angle Line Lock Phase Backlight Compensation BLC Do not aim the camera at the sun Keep the camera installation away from video noiseCheck the ambient temperature and humidity Do not shoot intense light Case of Problems Condition Check Points Specifications On / OFF DIP-SW Exterior View Wall Memo Limited Warranty