Changing each setting in PW SR mode | Toshiba IK-TF5 specification

(1. 3. 4) Changing each setting in PW SR mode

Move up down					Set by pushing
By pushing					Set by pushing
By pushing					DATA UP, DOWN
MENU UP, DOWN					DATA UP, DOWN
MENU UP, DOWN

-- SHUTTER --
MODE	E.TRG
E.TRG	PW SR
TRG.P
TRG.P
PART	OFF

•Shutter mode MANU, SS, E.TRG

•E.TRG mode

1P SNR, 1P SR, PW SNR, PW SR, RR

• Input trigger pulse setting at PW SNR and PW SR

Input trigger pulse : positive polarity Input trigger pulse : negative polarity

• Partial read switch OFF/ON

<MODE = E.TRG E.TRG = PW SR>

(a) Changing the polarity of inputting trigger pulse setting

1Set the "→ " to TRG.P by pushing [MENU UP], [MENU DOWN] buttons.

2Select either , by pushing [DATA UP], [DATA DOWN] buttons.

Note:

The longer the storage time with extended exposures, the more visible certain characteristics of CCD cameras become: fixed pattern noise, white pixels, etc.

17

Image 17

Toshiba IK-TF5 instruction manual Changing each setting in PW SR mode

Contents

For Customer Use IK-TF5 Safety Precautions May occur in such places Disclaimer Table of Contents Components Available selectins Preset value Items Controlled by Using on Screen Display Menu Down button Standard Connection Connector Pin AssignmentsConnection White Balance OperationAutomatic White Balance Manual White Balance Outline Result displayed Meaning Shading Correction Shutter speed mode is EXT Trig modeGain Using the Menus Mode Setting by on Screen Display Partial read setting Changing each setting in Manu modeMenus Shutter Electronic shutter Changing the shutter speed setting Changing each setting in SS synchro. scan mode Changing each setting in 1P SNR mode Changing each setting in E.TRG modeChanging the polarity of inputting trigger pulse setting Changing 1P SNR exposure time setting Changing 1P SR exposure time setting Changing each setting in 1P SR mode Changing each setting in PW SNR mode Changing each setting in PW SR mode Changing each setting in Gain Changing each setting in RR modeChanging the gain in Manu mode Gain Video gain WHT BAL White balance Changing master pedestal Changing shading correction modeChanging R pedestal Changing B pedestal Sync Adjusting horizontal phaseOption Changing RGB Sync External sync signal input conditions Setting to factory setting statusShutter mode HD input VD input External Sync Using the unit with external sync signal Setting by the frameSetting by 1H Synchro. Scan Operation EXT Trig External trigger 1P SNR 1 Pulse Sync Non Reset VD OUT*3 Video Index 1 Pulse Trigger SYNC-RESET Picture Output Timing 1P SR 1 Pulse Sync Reset PW SNR Pulse width trigger SYNC-NON Reset Video output 525H 1 Pulse Width Trigger SYNC-RESET Picture Output Timing PW SR Pulse width trigger SYNC-RESET Long Term Exposure RR Reset restartInput Timing Chart Example Partial Read When Partial Scanning Mode is onPartial Scanning OFF All pixels scanning Partial Scanning on Input Output Signal Specificatoins Vertical Output Waveform Timing Chart CCD Output Waveform Timing ChartHorizontal Output Waveform Timing Chart RGB, 3CCD Specifications Symptom Items to be checked External Appearance DiagramBefore Making a Service Call Imaging Systems Division Limited One 1 Year Warranty of Labor and PartsStep-by-step Procedures How to Obtain Warranty Service