Synchro. Scan Operation, Setting by the frame | Toshiba IK-TF5

( 3 ) Using the unit with external sync signal

When adjusting H (horizontal) phase refer to the item "7.2 (5) (5.1) Adjusting horizontal phase".

(3. 1) H (horizontal) phase adjustment

Observe the external sync signal and the video signal output waveform of the unit with a dual trace oscilloscope, and ad- just H phase so that the H phases match.

External

Sync. signal Match

the phase.

Camera

Video output

( 4 ) Changing HD/VD input/output

(1)Put off 6 screws both on flank/top of camera chassis.

(2)Change internal switch SJ01(HD/VD).

HD/VD OUTPUT

SJ01

HD/VD INPUT high-impedance HD/VD INPUT 75Ω (factory setting)

7. 4 Synchro. Scan Operation

The shutter speed can be set by the horizontal scanning period (1H) or by the frame.

( 1 ) Setting by 1H

1/525H to 524/525H stands for the setting by the 1H and the shutter speed can be set by the 1H (31.8 ms).

( 2 ) Setting by the frame

1FRM to 512FRM stand for the setting (long period exposure) by the frame.

The video signal stored during the frame period set is output as 1 frame video image at a frame interval specified.

VD output

Video output

Index output

(INDEX)

n

(4FRM setting)

n+1

23

Image 23

Toshiba IK-TF5 Synchro. Scan Operation, Setting by the frame, Using the unit with external sync signal, Setting by 1H

Contents

For Customer Use IK-TF5 Safety Precautions May occur in such places Disclaimer Table of Contents Components Available selectins Preset value Items Controlled by Using on Screen Display Menu Down button Standard Connection Connector Pin AssignmentsConnection Result displayed Meaning OperationWhite Balance Automatic White Balance Manual White Balance Outline Shading Correction Shutter speed mode is EXT Trig modeGain Using the Menus Mode Setting by on Screen Display Shutter Electronic shutter Changing each setting in Manu modePartial read setting Menus Changing the shutter speed setting Changing each setting in SS synchro. scan mode Changing 1P SNR exposure time setting Changing each setting in E.TRG modeChanging each setting in 1P SNR mode Changing the polarity of inputting trigger pulse setting Changing 1P SR exposure time setting Changing each setting in 1P SR mode Changing each setting in PW SNR mode Changing each setting in PW SR mode Gain Video gain Changing each setting in RR modeChanging each setting in Gain Changing the gain in Manu mode WHT BAL White balance Changing B pedestal Changing shading correction modeChanging master pedestal Changing R pedestal Changing RGB Sync Adjusting horizontal phaseSync Option External Sync Setting to factory setting statusExternal sync signal input conditions Shutter mode HD input VD input Synchro. Scan Operation Setting by the frameUsing the unit with external sync signal Setting by 1H EXT Trig External trigger 1P SNR 1 Pulse Sync Non Reset VD OUT*3 Video Index 1 Pulse Trigger SYNC-RESET Picture Output Timing 1P SR 1 Pulse Sync Reset PW SNR Pulse width trigger SYNC-NON Reset Video output 525H 1 Pulse Width Trigger SYNC-RESET Picture Output Timing PW SR Pulse width trigger SYNC-RESET Long Term Exposure RR Reset restartInput Timing Chart Example Partial Scanning on When Partial Scanning Mode is onPartial Read Partial Scanning OFF All pixels scanning Input Output Signal Specificatoins Vertical Output Waveform Timing Chart CCD Output Waveform Timing ChartHorizontal Output Waveform Timing Chart RGB, 3CCD Specifications Symptom Items to be checked External Appearance DiagramBefore Making a Service Call Imaging Systems Division Limited One 1 Year Warranty of Labor and PartsStep-by-step Procedures How to Obtain Warranty Service