Toshiba IK-TF5 instruction manual Components

1. CAUTIONS ON USE AND INSTALLATION

• Carefully handle the units.	• Handling of the protection cap.
Do not drop, or give a strong shock or vibration to	Keep the protection cap away from children. Chil-
the camera. This may cause problems. Treat the	dren may put them into mouth or swallow them
camera cables carefully to prevent cable problems,	accidentally. The protection cap protects the im-
such as cable breakdown and loosened connec-	age sensing plane when the lens is removed from
tions.	the camera, do not throw away.
• Do not shoot intense light.	• When not using the camera for a longtime.
If there is an intense light at a location on the	Stop supplying power.
screen such as a spot light, a blooming and smear-	• When cleaning the camera.
ing may occur. When intense light enters, vertical
	Always turn off the power and clean with a piece
stripes may appear on the screen. This is not a
	of soft dry cloth. Do not use benzine, alcohol, thin-
malfunction. Ghosts may occur when there is an
	ner, household detergents, chemically treated
intense light near the object. In this case, change
	cloths, etc. If used, coating and printed letters may
the shooting angle.
	be discolored. When cleaning the lens, use a lens
• Install the camera in a location free from noise.
	cleaning paper, etc.
If the camera or the cables are located near power	• Avoid using or storing the camera in the fol-
utility lines or a TV, etc. undesirable noise may ap-
	lowing places:
pear on the screen. In such a case, try to change
	Places filled with highly flammable gas.
the location of the camera or the cable wiring.
• Moire	Places near gasoline, benzene, or paint thinner.
	Places subject to strong vibration.
When thin stripe patterns are shot, stripe patterns
that are not actually there (moire) may appears	Places contacting chemicals (such as pesticides),
as interference stripes. This is not a malfunction.	rubber or vinyl products for a long period of time.
• Operating ambient temperature and humidity.	• For the customers in Europe.
Do not use the camera in places where tempera-	WARNING
ture and humidity exceed the specifications. Pic-	This is a Class A product. In a domestic environ-
ture quality will lower and internal parts may be
	ment this product may cause radio interference in
damaged.
	which case the user may be required to take ad-
Be particularly careful when using in places ex-	equate measures. The cable used to connect to
posed to direct sunlight. When shooting in hot	the VIDEO OUT DC IN/SYNC plug should be less
places, depending on the conditions of the object	than 30m in length.
and the camera (for example when the gain is in-
creased), noise in the form of vertical strips or
white dots may occur. This is not a malfunction.

2. COMPONENTS
(1)	Camera Control Unit	1
(2)	Accessories
	(a) Instruction manual	1

5