4. NAMES AND FUNCTIONS
1 Prism faceplate
8DC IN 12V terminal
2DISP button
4MENU UP button
(AWB)
DISP
MENU DATA
DC IN 12V
PAGE
RGB 
6DATA UP (AWB) button
7DATA DOWN button
|
| 5 MENU DOWN button |
| 3 PAGE button | 9 RGB terminal |
[ Front ] | [ Rear ] |
|
1 Prism faceplate | The protection cap is attached on the lens mount portion. After removing the cap, | |
| mount the lens. Be careful not to scratch or touch the optical area. | |
2 DISP button | Used when switching the display. |
|
3 PAGE button | Used when switching to the menu and when selecting the menus. | |
4 MENU UP button | Select the function to be confirmed or changed on the menu. | |
5 MENU DOWN button | Select the function to be confirmed or changed on the menu. | |
6 DATA UP (AWB) button | Changes the value of the function selected by the MENU (UP/DOWN) button. (Also | |
| used when using AWB.) |
|
7 DATA DOWN button | Changes the value of the function selected by the MENU (UP/DOWN) button. | |
8 DC IN 12V terminal | Accept a DC power input (12V). |
|
9 RGB terminal | Used as the connector terminal for RGB output, and SYNC output. | |
| HD and VD signals are input/output. When the random trigger operation is used, | |
| the trigger signal is input and the index signal is output. This terminal also includes | |
| an RS232C format control. |
|
7
