(1. 2) Changing the setting in SS (synchro. scan) mode

Move up down

 

Select the desired

by pushing

 

value by pushing

MENU UP, DOWN

 

DATA UP, DOWN

 

 

SHUTTER

 

 

 

 

MODE

 

SS

 

 

 

 

SS

 

OFF

 

 

OUT.P

 

OFF

<MODE = SS>

•Shutter mode MANU, SS, E.TRG, AUTO

•Synchro. scanning setting

refer to the item "7.3 Synchro. Scan Operation".

• Partial scanning switch（PART switch）

OFF, 40fps, 42fps, 50fps, 60fps, 70fps, 80fps, 90fps E.40fps, E.42fps, E.50fps, E.60fps, E.70fps, E.80fps, E.90fps

(a) Changing the shutter speed setting

aaMove the “” to SS by pushing [MENU UP], [MENU DOWN] buttons. aaSelect the shutter speed by pushing [DATA UP], [DATA DOWN] buttons.

(b) Partial scanning setting

aaMove the “” to OUT.P by pushing [MENU UP], [MENU DOWN] buttons. aaSelect the mode by pushing [DATA UP], [DATA DOWN] buttons.

caaMove “” to the current value by pushing [MENU UP], [MENU DOWN] buttons. daaSelect a desired settings by pushing [DATA UP], [DATA DOWN] buttons.

* The preset value of partial scanning is not displayed, when OUT.P is OFF.

Note:

The slow shutter speed may increase the fixed pattern noise and/or the white pixels. This is a characteristic of CCD, and is not a symptom of malfunction.

15