Due to the lens used or the environmental condition, vertical color shading may occur at the top and bottom of the screen and at the corners. In this case, the shading correction can decrease the color shading. For the shading correction of the unit, you can select among MANU (Manual shading correction) or OFF (no shading correction) for V.SHAD. (Vertical Shading) and C.SHAD. (Corner Shading).
MANU (Manual Shading correction)
Adjust the correction amount on the SHADING menu by confirming with a monitor or a waveform monitor.
• R size (R SIZE) |
| low | high |
|
Adjust the red correction area of the corner. 0 | 63 |
| ||
• R gain (R GAIN) | low | high |
|
|
Adjust the red correction level. | 31 |
|
| |
• R position (R POSI) |
|
| Left low | Right low |
Adjust the red correction area on left and right side. | 31 | |||
•B size (B SIZE)
Adjust the blue correction area of the corner.
•B gain (B GAIN)
Adjust the blue correction level.
•B position (B POSI)
Adjust the blue correction area on left and right side.
OFF
The status is no shading correction.
*The shading correction is effective when the lens iris or zoom ratio is fixed. Use the unit by setting V.SHAD and C.SHAD. to OFF.
Move up down |
| Select the desired | ||
by pushing |
| value by pushing | ||
MENU UP, DOWN |
| DATA UP, DOWN | ||
|
| SHADING |
|
|
|
| V.SHAD. |
| MANU |
|
| |||
|
| MANU | 0 | |
|
| C.SHAD. |
| MANU |
|
| R SIZE | 0 | |
|
| R GAIN | 0 | |
|
| R POSI | 0 | |
|
| B SIZE | 0 | |
|
| B GAIN | 0 | |
|
| B POSI | 0 | |
• Vertical Shading mode setting (MANU/OFF)
• Manual Vertical Shading mode adjustment
• Corner Shading mode setting (MANU/OFF)
• R size adjustment | 0 to 63 |
• R gain adjustment | |
• R position adjustment | |
• B size adjustment | 0 to 63 |
• B gain adjustment | |
• B position adjustment |
23