(1. 3) Changing the setting in E.TRG mode
The E.TRG has five modes; 1P SNR, 1P SR, PW SNR, PW SR, RR.
First move the “
” to MODE and select E. TRG, then move the “
” to E.TRG and select the desired E.TRG mode.
( 1.3. 1) Changing the setting in 1P SNR mode
Move up down |
| Select the desired |
by pushing |
| value by pushing |
MENU UP, DOWN |
| DATA UP, DOWN |
SHUTTER |
|
MODE | E.TRG |
E.TRG | 1P SNR |
TRG.P |
|
EXP. | 30ms |
OUT.P | OFF |
<MODE = E.TRG E.TRG = 1P SNR>
•Shutter mode MANU, SS, E.TRG, AUTO
•E.TRG mode
1P SNR, 1P SR, PW SNR, PW SR, RR
• Input trigger pulse setting at 1P SNR and 1P SR
Input trigger pulse : positive polarity 
Input trigger pulse : negative polarity
• Exposure time setting at 1P SNR and 1P SR |
| |||
0.01 ms 0.02 ms 0.4 ms 1 ms | 20 ms 30 ms | |||
0.01 ms | 0.02 ms | 0.1 ms | 1 ms | 2 ms |
step | step | step | step | step |
• Partial scanning switch（PART switch）
OFF, 40fps, 42fps, 50fps, 60fps, 70fps, 80fps, 90fps E.40fps, E.42fps, E.50fps, E.60fps, E.70fps, E.80fps, E.90fps
(a) Changing the polarity of the input trigger pulse setting
aaMove the “
” to TRG.P by pushing [MENU UP], [MENU DOWN] buttons. aaSelect either 
, 
by pushing [DATA UP], [DATA DOWN] buttons.
(b) Changing 1P SNR exposure time setting
aaMove the “
” to EXP. by pushing [MENU UP], [MENU DOWN] buttons. aaSelect the exposure time by pushing [DATA UP], [DATA DOWN] buttons.
(c) Changing the partial scanning setting
aaMove the “
” to OUT.P by pushing [MENU UP], [MENU DOWN] buttons. aaSelect the mode by pushing [DATA UP], [DATA DOWN] buttons.
caaMove “
” to the current value by pushing [MENU UP], [MENU DOWN] buttons. daaSelect a desired settings by pushing [DATA UP], [DATA DOWN] buttons.
* The preset value of partial scanning is not displayed, when OUT.P is OFF.
16