17
Zoom / Focus / Iris
Zoom In / Zoom Out:
Zoom In expands the view and Zoom Out reducesthe view. Click and hold to
continuously zoom the camera.
Focus Near / Focus Far:
When clicked, focus will be set to manual mode and the lens focus will be adjusted.
If the Pan/Tilt/Zoom button is clicked, it will return to Auto Focus.
NOTE: In a wide angle, the manual focus increments increase.
Iris Open / Iris Close:
When clicked, iris will be set to manual mode and the iris will be adjusted. If the
Pan/Tilt/Zoom button is clicked, it will return to Auto Iris.
Preset
Setup method:
1. Move the camera to the desired position.
2. Input the preset position number.
3. Click the ‘Set’ button.
Move method:
1. Input the preset position number.
2. Click ‘Go to’ button.
NOTE:
Manual focus cannot be set as preset position.
Scan
To set the scan speed, refer to Camera Settings Basic Pan / Tilt Scan
Speed.
Auto :
The camera will pan continuously until a manual pan, tilt, zoom, or Stop operation is
performed.
(Zoom) At power-up, the zoom is fully zoomed out. When an auto scan is started
directly, the zoom will maintain the last magnification.
(Tilt) At power-up, the tilt is set up by the Configuration. To set the tilt angle, refer to
Camera Settings Basic Tilt Angle.