46
Daylight saving
Select ON to activate the daylight-saving function if you are in a daylight-
saving time (effective for NTP mode only).
FW Update
You can update system firmware once the update file is available.
It is the customer's responsibility to update firmware.
All camera motions will shut down during firmware update.
Close any other screens on the PC before starting a firmware update.
Never disconnect power and LAN cable during the firmware update process.
Rebooting the camera after firmware update may take approx. 3minutes.
After finish FW update, please reboot Internet explorer® on your PC.
Maintenance
Import Configuration Settings
This function is designed to upload configuration setting from the client PC to
network cameras.