32
NOTE:
The status of the alarm blinks above the live video screen. Double click the
status to clear the alarm
Motion detection doesn’t work during PTZ.
Even if a scene is changed by PTZ, detection area is not changed
automatically. setup the detection area again.
Alarm Output
When the Alarm input is triggered, the camera will send out a signal through the
Alarm output. (See the page 19 in the QSG. After alarm is triggered, this switch
will short between COM and OPEN.)
You can set Alarm Mode as OFF or Event. If you choose OFF, this function will
be closed, And you can set alarm dwell time as 1s, 5s, 10s, 15s, 30s, 60s by the
menu of ‘Output Delay Time’.