42
Camera Name: Enter your camera name. This name is displayed as the camera
name of Configuration window and on the frame of Internet explorer of a Live
Video window.
DHCP (Default is ‘ON’.):
The IP address is automatically obtained when you select “ON”; otherwise, select
“OFF” to setup the static IP address.
IP Address:
Input your static IP address here when you select DHCP off.
Subnet Mask:
If the subnet mask is not properly configured, the camera may not be able to
communicate with other devices on the network.
Default Gateway:
Leave blank as default setting. It is not necessary to enter Default Gateway if it is
not used. Ask your Network Administrator for Default Gateway information.
Primary DNS: (same as above)
Secondary DNS: (same as above)
HTTP Port Number: We recommend using the default port number. If you need to
change the default port, contact your Network Administrator. Options: 1025 to
65535 (80 is the default).
Enter a host name. Ask your Network Administrator.
Enter a domain name. Ask your Network Administrator
UPnP: When set to “ON”, the camera can be detected automatically if you use
UPnP protocol from the PC.
DDNS
This section explains how to configure the dynamic domain name service (DDNS) for
the Network
Camera.
The provider list contains two hosts that provide DDNS service. Please connect to the
service provider’s web site to review the service charges and sign-up for the service if
you want to use DDNS.
ChangeIP.com
http://www.changeip.com/toshiba/
No-IP.com
http://www.no-ip.com/ext/toshiba.php
Click “ON” to activate the DDNS function or “OFF” to disable the DDNS function.
Select a DDNS server: NO IP, CHANGE IP, from the drop-down list of the DDNS