34
1. Recording Condition: You can save image files based on your scheduled
recording, or Event Recording settings.
Scheduled Recording Table: Determine the recording condition: OFF,
All Day, Schedule 1 or Schedule 2 from the recording schedule table for
all days from Monday to Sunday.
Recording Interval: Set a time interval for recording images.
Event Recording Setting: Images are recorded when Alarm In is
detected.
Pre-Recording: Set the number of images to be recorded immediately
before motion occurs. Images at the moment when motion occurs are not
included.
Post-Recording: Set the number of images to be recorded immediately
after motion occurs. Images at the moment when motion occurs are not
included.
Recording Interval: Set a time interval for motion recording.
2. Cycle Recording: You can set it as ‘OFF’ or ‘ON’. If set to ‘ON’, the SD card will
automatically overwrite when full.
3. Recorded Files: Click “Delete all” to delete all files. Click “Delete from Event
Recording list” to delete the files you have kept on Event Recording. Click “Delete
from Scheduled Recording list” to delete the files you have kept on Scheduled
Recording.
NOTE:
When events occur frequently, Pre-Recording, Post-Recording, and Recording
Interval may be unable to be recorded as setup.