Toshiba KD-1025 manual Remove 1 connector and take off the PFP motor assembly

(3)Remove the belt.

Note:

When installing the belt, be sure to confirm the gap between the belts with the following procedure.

1.Install the belt in KD-1025.

2.Tighten 1 fixing screw of the tensioner bracket.

3.Confirm that the gap between the belts is approx. 3 mm.

Fig. 4-36

Approx.3mm

Fixing screw

Fig. 4-37

(4)Remove 1 connector and take off the PFP motor assembly.

Connector

PFP motor assembly

Fig. 4-38

KD-1025	© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT

4 - 14