Toshiba KD-1025 manual Periodic Maintenance, Symbols used in the checklist

6.PERIODIC MAINTENANCE

1

2

3

				2
				3
				1
			Fig. 6-1
Symbols used in the checklist
Cleaning	Lubrication/Coating		Replacement	Operation check
A: Clean with	W1:	White grease	Value: Replacement cycle	O: After cleaning or
alcohol		(Molykote EM-30L)	R: Replace if deformed or	replacement, confirm
O: Clean with soft	W2:	White grease	damaged	there is no problem.
pad, cloth or		(Molykote HP-300)
vacuum	AV:	Alvania No.2
cleaner	L:	Launa 40

Preventive Maintenance Checklist

Note:

Page-Item (P-I) is described in the column of the Parts list.

	Items to check	Cleaning	Lubrication/	Replacement	Operation	Parts list	Remarks
			Coating	(x 1,000 sheets)	check	<P-I>
1	Pickup roller	A		80
	(upper/lower)
2	Feed roller	A		80
	(upper/lower)
3	Separation roller	A	AV, W2	80			*c1
	(upper/lower)
4	Drive gear		W1				*c2
	(tooth face/shaft)
5	Transport roller	A		R
	(upper/lower)
6	Paper guide	O
7	GCB bushing		L
	bearing
8	One side of the		W1
	plastic bushing
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved							KD-1025
						PERIODIC MAINTENANCE

6

6 - 1