Toshiba KD-1025 manual Protrusion

(4)Remove 2 screws and take off the bracket of the feeding gear.

Note:

Match the protruding portion of the clutch with the position shown in the figure for assembling.

(5)Disconnect the connector of the lower drawer tray-up motor and remove 2 harness clamps from the bracket.

Protrusion

Fig. 4-30

Fig. 4-31

(6)Remove 2 screws and take off the tray-up motor along with the bracket.

Bracket

Fig. 4-32

KD-1025	© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT

4 - 12