KD-1025 © 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 2
[C] Stabilizer cover
[D] Rear cover
(1) Take out the drawer.
P.4-1 "[A] Drawers"
Note:
The drawer must be taken out only when
taking off the front side stabilizer cover.
(2) Remove 2 screws and take off the front side
stabilizer cover.
(3) Remove 1 screw and take off the feeding
side stabilizer foot.
Fig. 4-3
(4) Remove 2 screws and take off the rear side
stabilizer cover.
Fig. 4-4
(1) Take off the rear side stabilizer cover.
P.4-2 "[C] Stabilizer cover"
(2) Remove 2 screws on the rear cover.
(3) Take off the rear cover.
Fig. 4-5
Feeding side
stabilizer foot
Front side
stabilizer cover
Rear side stabilizer cover