Toshiba KD-1025 manual Drawer feed clutch CLT2/CLT3

(4)Remove pulley, one-way clutch, and 3 E- rings to take off the pickup roller.

Pulley

One-way clutch

Pickup roller

E-rings

Fig. 4-45

4

[E]Drawer feed clutch (CLT2/CLT3)

(1)Take off the drawer feeding unit. P.4-15 "[A] Drawer feeding unit"

(2)Remove 2 screws, and take off the clutch bracket and the bushing.

(3)Remove 1 connector and take off the clutch.

Note:

Match the protruding portion of the clutch with the position shown in the figure for assembling.

Bushing

Clutch bracket

Fig. 4-46

Protrusion

Clutch

Connector

Fig. 4-47

© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved	KD-1025
	DISASSEMBLY AND REPLACEMENT

4 - 17