Manuals / Toshiba / TV and Video / VCR

Toshiba kV-9168A ON-SCREEN Functions, Date-Time Display, VCR display, Monitor screen

Models: kV-9168A

1 52

Download 52 pages 223 b

Page 17

ON-SCREEN FUNCTIONS

When the power is turned ON, the time and date modes are displayed on the monitor screen (live picture). On-screen displays are not available in the event of no video input signal.

Date-Time Display

VCR display

INTRODUCTION

8/28/97 THU 17:30:02SPA 2

1 Date

2 Day of the week

8/28/97 THU 17:30:02SPA 2

PREPARATION

3 Time

Monitor screen

1Date : Displayed with the month-day-year.

2Day of the week : Automatically set to the correct day of the week when the date is set.

3 Time : Set to 24-hour cycle at factory.

It is possible to modify to 12-hour (AM/PM) cycle display.

4 Playback/Recording Time : Playback or Recording time display

4

Playback/Recording time

SP : SP mode

Nothing : EP mode

On-Screen Position

	8/28/97 THU
	17:30:02SPA 2
8/28/97 THU	8/28/97 THU
17:30:02SPA 2	17:30:02SPA 2
17:30:02SPA 2

8/28/97 THU 17:30:02SPA 2

Press the LOCATION SELECT button to adjust the display to desirable position. The display moves in the direction shown by the arrows.

Press this button : To down

LOCATION SELECT

Press this button : To right

However, during the date-time display screen, pay attention to the following when setting the date and time display positions:

When the display is set to an end of the monitor screen as shown in the figure, synchronization instability or color flickering may occur in some monitor TVs.

PLAYBACK

OPERATION

NOTICE

16

Image 17

Toshiba kV-9168A instruction manual ON-SCREEN Functions, Date-Time Display, VCR display, Monitor screen, On-Screen Position

Contents

Instruction Manual Please Read Important Precautions Power Sources Important Safety InstructionsRadiators, heat registers, stoves Unplug this product from the wall Power Lines AccessoriesWhen the power-supply cord or plug is damaged To restore the product to its normal operation Table of Contents Features Front Panel Instructions in Brief Tape Remain button Time Mode / SET + buttonsCassette Compartment Display button Rear Panel Specification of Battery Word on the Exclusive 3N-100AAS Battery PackInstallation Removal VCR Display FF button REW buttonPress to start play back Connection with a Video Camera Connections Video Typical Connection with the Sequential SwitcherTo REC TRIGG. OUT Output Contents of Screen Display Alarm Recall Screen Operation Setting the Clock Date-Time Display ON-SCREEN FunctionsVCR display Monitor screen Display Screen Is pressed. When an alarm is Alarm numberChanges to the alarm number This function enables to indicate and record information Counter Memory Alarm MemoryCounter Displays Code Number Condition of Abnormality Error MessageTape Remain A18 20s Fields/s Possible Continuous Virtual Real Time mode Setting the RECORDING/PLAYBACK TimeHOW to Operate 24 Hour Virtual Real Time Mode Unloading a Cassette Loading and Unloading a Video CassetteLoading a cassette Camera and monitor TV Recording Restart Recording Setting the Restart Recording Setting the Timer Program Timer RecordingDaily Timer Recording Program Screen Power goes off and the Timer display lights Time Mode button is pressed, the displayShould be more than 1 minute. If they are same, timer During timer power off mode, alarm recording will not Press the Shift Button to blink the MO1 start time Weekly Timer RecordingPress the Shift ButtonGRAM.to blink PRO Example Overlapping ProgramsFR2 DLY Operation at Alarm Input Alarm RecordingAlarm Recall Display Event Recording Connecting the Alarm Terminals Display Recording time Setting the Alarm RecordingCont Manual Auto Recording Connecting the External control terminalOperation of Auto Recording Auto recording How to forbid Auto Recording How to release Auto RecordingPress Timer button to release the timer mode Press the + or SET Setting contents Buzzer Screen display Counter display How to Set to Stop at End of TapeOperation After Tape END Detection Display Operation after detection of tape end Menu Screen How to Set to Auto Rewind at End of TapeAlarm recording does not operate during auto-rewind ButtonREC. to select REW → How to Set to Repeat Record at End of Tape Connection with the Sequential Switcher Recording with the Sequential SwitcherTiming for Camera Switching C D a B C D REC Trigger Output Selection in the Alarm Recording Playback Tracking AdjustmentRecording time mode Time mode for playback REW Stop Using the Shuttle DialPicture Search Play Slow Still Play Playback in Various Modes Search Operation Time Date Search Alarm M to light Alarm SearchStill picture mode Press the Play button Press the Counter Memory button twice to make Input/Output Terminal Signal level Additional remarks Signal Levels of INPUT/OUTPUT Terminals Press the or Time Mode button to go to SPA2 mode Check the playback picture recorded in SPA2 modeDaily and Periodic Inspection Order of Daily Checks Steps to Take after Daily Checks Recording Usage frequency Time modeRequest for Periodic Checks Tape Usage Frequency Dew Condensation Installation Before Calling Service PersonnelFunction/Operation Recording Other matters Playback Connector section SpecificationsAccessories Dew caution sheet 70971825 Limited Warranty