INTRODUCTION
COUNTER DISPLAYS
Counter Memory
When the counter is set to “0000” at a location that you want to see again during recording and playback, the tape will stop in the vicinity of “0000” during rewind and fast forward.
PREPARATION
RECORDING | OPERATION |
When the alarm counter is displayed, press the
1 ALARMdisplay. button to set the display to the counter
H
RECSP
COUNTER
MEMORY ALARM RESET
Press the RESET button at the location you want to
2 see.
H
RECSP
COUNTER 
MEMORY ALARM RESET
Alarm Memory
Press the COUNTER MEMORY button to make
3 “COUNT.M” (Counter Memory) to light.
COUNT. | H |
M |
|
REC | SP |
|
COUNTER 
MEMORY ALARM RESET
Turn the SHUTTLE dial to set rewind or fast forward
4 after STOP button is pressed.
COUNT. | H |
M |
|
| SP |
REV | FWD |
When you want to view the location where alarm recording was performed.
1 Press the STOP button.
ALARM
H
Turn the SHUTTLE dial to set rewind or fast forward.
3 | ALARM | ALARM | H |
M |
| ||
PLAY | SP |
|
RECSP
PLAY |
| STOP |
REV | FWD | When the tape reaches the |
|
| alarm recorded position, The |
|
| VCR automatically enters the |
|
| still picture mode. |
NOTICE
2 | Press the COUNTER MEMORY button twice to make | 4 | Press the PLAY button. | |||
“ALARM. M” to light. | ALARM | ALARM | H |
| ||
|
| M |
|
|
| |
|
|
| SP |
|
|
|
| COUNTER |
|
|
|
| PLAY STOP |
MEMORY ALARM RESET |
|
|
|
|
| |
19
