The VCR can be programmed to automatically restart recording when the tape reaches its end. With this function, the VCR will automatically rewind the tape and begin recording.
How to Set to Repeat Record at End of Tape
INTRODUCTION
Press the DISPLAY
1 button.
DISPLAY – TIME MODE +
SET
SHIFT | TRACKING |
| |
| LOCATION SELECT |
M E N U
CLOCK ADJUST SETUP DISPLAY MODE PROGRAM ALARM RECALL TIME DATE SEARCH
END=[DISPLAY]
Press the + or – SET
4 buttonREC. to select REW →
DISPLAY – TIME MODE +
SET |
|
SHIFT | TRACKING |
| |
| LOCATION SELECT |
iNow the Repeat Recording Setting is completed.
S E T U P
ALARM REC TIME | 15S | |
SPEED | SPA 2 | |
RESTART REC | OFF | |
TAPE END MODE | REW➜REC |
|
ALARM | STOP | |
MENU=[DISPLAY]
PREPARATION
Press the 
or 
SHIFT
2 button to blink SETUP and press the + SET button.
DISPLAY – TIME MODE +
SET |
|
SHIFT | TRACKING |
| |
| LOCATION SELECT |
M E N U
CLOCK ADJUST SETUP DISPLAY MODE PROGRAM ALARM RECALL TIME DATE SEARCH
END=[DISPLAY]
Press the DISPLAY
5 buttondisplay.twice to erase the
DISPLAY – TIME MODE +
SET
SHIFT | TRACKING |
| |
| LOCATION SELECT |
8/28/97 THU 17:30:02SPA 2
Press the 
or 
SHIFT
3 button to blink TAPE END MODE.
DISPLAY – TIME MODE +
SET
SHIFT | TRACKING |
| |
| LOCATION SELECT |
S E T U P |
|
|
ALARM REC TIME | 15S | |
SPEED | SPA 2 | |
RESTART REC | OFF | |
TAPE END MODE | STOP |
|
ALARM | STOP | |
MENU=[DISPLAY]
iWhen tape end is detected during recording, the VCR automatically rewinds the tape and goes to recording mode at beginning of the tape.
Caution:
If you need the VCR to repeat record even if an alarm condi- tion occurred then set TAPE END ALARM to “CONT.” in the
MENU SCREEN.
Notes:
iWhen the VCR is working in repeat recording, make sure to carry out daily checks.
iAlarm recording does not operate during auto-rewind.
PLAYBACK | OPERATION |
NOTICE
36
