Operating Basics

Wireless LAN

The Wireless LAN is compatible with other LAN systems based on Direct Sequence Spread Spectrum/Orthogonal Frequency Division Multiplexing radio technology that complies with the IEEE802.11 Wireless LAN standard.

■Frequency Channel Selection of 5GHz for IEEE 802.11a or/and IEEE802.11n■Frequency Channel Selection of 2.4GHz for IEEE 802.11b/g or/and IEEE802.11n■Roaming over multiple channels■Card power management

■Wired Equivalent Privacy (WEP) data encryption based on an 128-bit encryption algorithm

■Wi-Fi Protected Access™ (WPA™)

The transmission speed over the wireless LAN, and the distance over which the wireless LAN can reach, may vary depending on surrounding electromagnetic environment, obstacles, access point design and configuration, client design and software/hardware configurations. The transmission rate described is the theoretical maximum speed as specified under the appropriate standard - the actual transmission speed will be lower than the theoretical maximum speed.

Setting

1.Please make sure that the Wireless Communication function is on.

2.Click Start  Control Panel  Network and Internet  Network and Sharing Center.

3.Click Set up a new connection or network.

4.Follow the wizard. You will need the name of the wireless network together with security settings. Consult the documentation accompanied with your router or ask your wireless network administrator for the settings.

Security

■TOSHIBA strongly recommend that you enable encryption functionality, otherwise your computer will be open to illegal access by an outsider using a wireless connection. If this occurs, the outsider may illegally access your system, eavesdrop, or cause the loss or destruction of stored data.

■TOSHIBA is not liable for the loss of data due to eavesdropping or illegal access through the wireless LAN and the damage thereof.

User’s Manual

4-26