Troubleshooting

It is recommended to leave the computer off until the interior reaches room temperature even though the DC IN indicator stops blinking.

 

If the computer has reached room temperature

 

and it still does not start, or if it starts but shuts

 

down quickly, contact your reseller, dealer or

 

service provider.

Computer shuts down

This indicates a problem with the heat dispersal

and its DC IN indicator

system - you should contact your reseller, dealer

is flashing whiteor service provider.

AC power

If you have trouble turning on the computer with the AC adaptor connected you should check the status of the DC IN indicator. Please refer to Chapter 6, Power and Power-Up Modes for further information.

ProblemProcedure

AC adaptor doesn’t power the computer (DC IN indicator does not glow white)

Check the connections to make sure that the power cord/adaptor is firmly connected to the computer and a working power outlet.

Check the condition of the cord and terminals. If the cord is frayed or damaged it should be replaced, while if the terminals are soiled, they should be cleaned with a clean cotton cloth.

If the AC adaptor still does not power the computer, you should contact your reseller, dealer or service provider.

Battery

If you suspect a problem with the battery, you should check the status of the DC IN indicator as well as the Battery indicator. Please refer to Chapter 6, Power and Power-Up Modes for more information on these indicators, together with general battery operation.

Problem

Procedure

Battery doesn’t powerThe battery may be discharged - connect the AC
the computeradaptor to recharge the battery.
Battery doesn’t chargeIf the battery is completely discharged, it will not
when the AC adaptor isbegin charging immediately, in these instances
attached (Batteryyou should wait a few minutes before trying
indicator does not glowagain. If the battery still does not charge, you
amber).should check that the power outlet the AC

 

adaptor is connected to is supplying power - this

 

can be tested by plugging another appliance into

 

it.

User’s Manual

8-5