HW Setup

Password

This option allows you to set or reset the user password for power on.

User Password

Lets you register a new password or change/remove an existing password.

Not Registered

Changes or remove the password. (default)

Registered

Selects the password. A dialogue box will appear

 

to allow you to set the password.

To enter a user password:

1.Select Registered to display the following prompt:

Enter Password:

Enter a password of up to 10 characters. The character string you enter is displayed as a string of asterisk.

2.Click OK. The following message appears, allowing you to verify the password.

Verify Password:

3.If character strings match, the password is registered. Click OK. If they do not match, the following message appears. You must repeat from step 1.

Entry Error!!!

To delete a user password:

1.Select Not Registered to display the following prompt:

Enter Password:

2.Enter the currently registered password. The character string you enter is displayed as a string of asterisks.

3.Click OK. If the character string you enter matches the registered password, the password option is reset and the display changes to:

Not registered

If they do not match, the following message appears. You must repeat from step 1.

Incorrect Password.

Owner String

This blank field is used to display a message when the password field is displayed on startup. If a password is not registered the message will not be shown. The maximum length is 256 characters.

User’s Manual

7-2