HW Setup window

Temporarily changing the priority

To temporarily change the boot drive, follow the steps below.

1.Hold down F12 and boot the computer.

2.A menu will be displayed with the following icons: Hard Drive, Removable Devices, CD/DVD-ROM Drive and Network Boot. The selected boot device will be effective only for the next boot.

3.Use the up/down cursor keys to highlight the boot device you want and press

Enter.

NOTES: 1. If a supervisor password is set, the menu above does not appear when you use the user password to start the computer.

2.The selection method above does not change the boot priority settings in HW Setup.

3.If you press a key other than one of those above or if the selected device is not installed, the system will boot according to the current setting in HW Setup.

4.Support of PC (ATA) card boot is guaranteed only for TOSHIBA PC card HDDs.

5.A PC (ATA) card takes the position of HDD in the Boot Priority Options list, if the card is set up as the boot device in BIOS setup.

Built-in LAN disabled

Under certain conditions, LAN will automatically be moved to the last item in the boot priority list.

If you disable Built-in LAN in HW Setup, LAN will become the last item the next time you start the computer. For example:

1.Boot priority option is set to HDD −> LAN −> FDD −> CD-ROM.

2.You disable Built-in LAN in HW Setup and restart the computer.

3.The boot priority option setting will automatically change to HDD −> FDD

−> CD-ROM −> LAN.

If you enable Built-in LAN and change the boot priority setting, LAN will remain in the last position the next time you start the computer. Your selected boot priority will become effective from the second time you start the computer.

ETUPS HW

7-3