Appendix G

*1 Factory-set default channels

*2 Refer to the sheet Approved Countries/Regions for use for the countries/regions that in which these channels can be used.

When installing Wireless LAN Cards, the channel configuration is managed as follows:

❖For wireless clients that operate in a Wireless LAN Infrastructure, the Wireless LAN Card will automatically start operation at the channel identified by the Wireless LAN Access Point, When roaming between different access points the station can dynamically switch to another channel if required.

❖For Wireless LAN Cards installed in Wireless clients that operating in a peer- to-peer mode, the card will use the default channel 10.

❖In a Wireless LAN Access Point, the Wireless LAN card will use the factory- set default channel (printed in bold), unless the LAN Administrator selected a different channel when configuring the Wireless LAN Access Point device.

Wireless IEEE 802.11 Channels Sets (Revision A)

ChannelID

Frequency Range 5150-5850 MHz

Note

36

5180

 

40

5200

 

44

5220

 

48

5240

 

52

5260

 

56

5280

 

60

5300

 

64

5320

 

149

5745

 

153

5765

 

157

5785

 

161

5805

 

 

 

 

G PPENDIXA

G-3