Hardware and system checklist
Wireless LANIf the following procedures do not restore LAN access, consult your LAN adminis- trator. For more information on wireless communication, refer to Chapter 4, Operating Basics.
Problem | Procedure |
Cannot access | Make sure the computer’s wireless |
Wireless LAN | communication switch is set to on. |
| If problems persist, contact your LAN administra- |
| tor or dealer. |
|
|
Refer also to your Personal Conferencing Kit’s documentation.
Problem | Procedure |
Display on TV is poor | Make sure the TV type is correct for your area: |
| NTSC (US, JAPAN), PAL (Europe). |
|
|
No display | Try adjusting the contrast and brightness controls |
| on the external monitor. |
|
|
| Press hotkeys Fn + F5 to change the display. |
| Refer to Chapter 5, The Keyboard. |
| NOTE: If you turn the computer off in Standby |
| mode while the display is on TV, the computer will |
| select either the internal LCD or an external |
| computer CRT as the display device. |
| If problems persist, contact your dealer. |
|
|
ROUBLESHOOTINGT