19
TV operation
■ SLEEP
To set the unit to turn off after a preset amount of time,
press SLEEP on the remote control. The clock will
count down 10 minutes for each press of SLEEP (120,
110, ...10, 0). After the sleep time is programmed, the
display will appear briefly every ten minutes to remind
you that the sleep timer is operating. To confirm the
sleep timer setting, press SLEEP and the remaining
time will be displayed for a few seconds. To cancel the
sleep timer, press SLEEP repeatedly until the display
turns to 0.
■ HEADPHONES
Insert a monaural headphones (not supplied) with a 1/
8” mini plug into the PHONE jack on the front panel. If
you connect headphones, the sound from TV speakers
is muted.
■ CHANNEL UP/DOWN
Press and release CH or . The channel auto-
matically stops at the next channel set into memory.
For proper operation, before selecting channels, they
should be set into the memory. See page 21 “To
memorize channels”.
■ CHANNEL RETURN
This button allows you to go back to the last channel
selected by pressing CH RTN. Press CH RTN again to
return to the last channel you were watching.
■ MUTE
Press MUTE to switch off the sound. The unit’s sound
will be silenced and “MUTE” will briefly appear on the
screen. The sound can be switched back on by pressing
this button again or one of VOL +/–.
SLEEP
120

CH /

SLEEP

VOL +/–

CH RTN

MUTE

TV operation
MUTE
Illustration of MV13Q41
5S20101A [E]p18-21 12/16/04, 4:27 PM19